 |
|
|
|
|
For complete stainless cable assemblies
click here!
For complete aluminum post and stainless
cable railing packages click here!
|
|
|
 |
|
TERMINATION FITTINGS
Button Terminal
The BT can be used on any post material. Simply drill
through your termination post and slip the cable and
button through. The button rests on the outside face
of the post providing a solid termination. The BT is
a great choice for all SRS post applications.
- Approved Fitting for all SRS Post Systems
- Can be used with any post material
- Sleek Sheik and Sexy
Spec
drawings
|
|
 |
Deck Toggle Terminal
The DTT is used for direct attachment to buildings
or wood posts, just screw fast to the inside face. It
also makes a great fitting on stairs since the wing
articulates to the pitch of any stair angle.Not recommended
for SRS post applications
- Wood Post Applications
- Stair applications
- Direct Attachment
Spec
drawings
|
|
 |
Jaw Toggle Terminal
The JTT is a very versatile fitting .
It can be used for steel or wood applications by welding
tabs or eyes on the sides of the posts. Also, a great
choice for stairs since this fitting can be set at the
pitch of your stairs. Not recommended for SRS post
applications.
- Steel Angle Iron Applications
- Stair Applications
- 1/4" Steel Plate w/ 1/4 " Holes
Spec
drawings
|
|
 |
.
Lock T Terminal *
The LTMS machine swage fitting is a great choice
for hollow core posts. The T- Lock is only available
for 1/8" cable. SRS swages the fitting on
to the cable. Then just slip inside the post and
the fittings T locks on the inside of the post. A very
economical fitting that can also be used on stair applications.
- Approved Fitting for all SRS Post Systems
- Hidden termination terminal
- Stair applications
|
|
 |
Lock T Terminal (HS) *
The LTHS fitting is a great choice for all SRS hollow
core posts. You may hand swage this terminal in the
field. This fitting only works for 1/8 " dia. cable.
- Approved Fitting for All SRS Post Systems
- Hand Swage in the Field
- Hidden Terminal
- Stair Applications
|
|
 |
Versa- Ball Terminal
The VBT fitting works great on stair applications where
the angle is greater than 30 degrees.
- Angle Applications Over 30 Degrees
- Countersunk to Accept Button Termination Fittings
- Flush Mount for Threaded Tensioning Fittings
The VBT fitting works great on stair applications where
the angle is greater than 30 degrees.
Spec
drawings
|
|
 |
[ Top ]
|
|
